Bicycle Brake Lever Won't Return
Introduction
Riding a bicycle is an enjoyable and healthy way to travel. However, it can be frustrating when the brake lever doesn't return to its original position after you release it. This problem can be dangerous and compromise your safety while you're cycling. In this article, we'll discuss the possible causes of a bicycle brake lever that won't return and how to fix it.
Causes of a Bicycle Brake Lever That Won't Return
There are several possible causes of a brake lever that won't return:
- The brake cable is dirty or corroded.
- The brake cable is frayed or worn.
- The brake lever is damaged or worn.
- The brake pivot is dirty or corroded.
- The brake spring is weak or broken.
How to Fix a Bicycle Brake Lever That Won't Return
The following steps can help you fix a bicycle brake lever that won't return:
Step 1: Check the Brake Cable
Check the brake cable to see if it's dirty, corroded, frayed, or worn. Clean or replace the cable if necessary.
Step 2: Check the Brake Lever
Check the brake lever to see if it's damaged or worn. If so, replace the lever.
Step 3: Check the Brake Pivot
Check the brake pivot to see if it's dirty or corroded. Clean the pivot if necessary.
Step 4: Check the Brake Spring
Check the brake spring to see if it's weak or broken. Replace the spring if necessary.
Step 5: Adjust the Brake Cable Tension
Adjust the brake cable tension so that the brake pads are close to the rim but not touching it. This will help the brake lever return to its original position after you release it.
Conclusion
A bicycle brake lever that won't return can be a frustrating and dangerous problem. However, by following the steps outlined in this article, you can diagnose the problem and fix it yourself. Remember to always prioritize safety when cycling and to regularly maintain your bicycle to prevent problems like this from occurring.