Fitting Instructions For A50 And A80 Bicycle Engine Kits
Introduction
If you're looking to upgrade your bicycle's performance, installing an engine kit can be a great option. Two popular engine kits on the market are the A50 and A80 models. These kits come with everything you need to convert your bicycle into a motorized vehicle. In this article, we'll provide detailed fitting instructions for both A50 and A80 bicycle engine kits.
Tools Required
Before getting started, you'll need to gather a few tools:
- Socket set
- Allen wrench set
- Screwdriver set
- Adjustable wrench
- Torque wrench
- Plastic zip ties
A50 Engine Kit Fitting Instructions
Follow these steps to install the A50 engine kit on your bicycle:
Step 1: Remove the Pedals and Crank Arms
Start by removing the pedals and crank arms from your bicycle using your socket set and Allen wrench set. Keep these parts aside as you'll need to reinstall them later.
Step 2: Install the Engine Mount
Next, attach the engine mount to the frame of your bicycle using the screws provided in the kit. Use your torque wrench to tighten the screws to the manufacturer's recommended torque settings.
Step 3: Install the Engine
Attach the engine to the mount using the bolts and nuts provided. Use your torque wrench to tighten these to the manufacturer's recommended torque settings.
Step 4: Install the Chain Tensioner
Attach the chain tensioner to the engine mount using the screws provided. Adjust the tensioner until the chain is tight but not too tight.
Step 5: Install the Clutch Cable
Attach the clutch cable to the clutch lever on the engine. Adjust the cable until there is about 1/8 inch of play in the lever.
Step 6: Install the Throttle Cable
Attach the throttle cable to the throttle grip on the handlebars. Adjust the cable until there is about 1/8 inch of play in the grip.
Step 7: Reinstall the Pedals and Crank Arms
Finally, reinstall the pedals and crank arms to your bicycle using your socket set and Allen wrench set.
A80 Engine Kit Fitting Instructions
Follow these steps to install the A80 engine kit on your bicycle:
Step 1: Remove the Pedals and Crank Arms
Start by removing the pedals and crank arms from your bicycle using your socket set and Allen wrench set. Keep these parts aside as you'll need to reinstall them later.
Step 2: Install the Engine Mount
Next, attach the engine mount to the frame of your bicycle using the screws provided in the kit. Use your torque wrench to tighten the screws to the manufacturer's recommended torque settings.
Step 3: Install the Engine
Attach the engine to the mount using the bolts and nuts provided. Use your torque wrench to tighten these to the manufacturer's recommended torque settings.
Step 4: Install the Exhaust
Attach the exhaust to the engine using the bolts provided. Use your torque wrench to tighten these to the manufacturer's recommended torque settings.
Step 5: Install the Chain Tensioner
Attach the chain tensioner to the engine mount using the screws provided. Adjust the tensioner until the chain is tight but not too tight.
Step 6: Install the Clutch Cable
Attach the clutch cable to the clutch lever on the engine. Adjust the cable until there is about 1/8 inch of play in the lever.
Step 7: Install the Throttle Cable
Attach the throttle cable to the throttle grip on the handlebars. Adjust the cable until there is about 1/8 inch of play in the grip.
Step 8: Reinstall the Pedals and Crank Arms
Finally, reinstall the pedals and crank arms to your bicycle using your socket set and Allen wrench set.
Conclusion
Installing an engine kit on your bicycle can be a fun and exciting project. With these fitting instructions for A50 and A80 bicycle engine kits, you'll be able to enjoy your motorized bicycle in no time. Remember to always follow the manufacturer's instructions and use the recommended torque settings to ensure a safe and reliable installation.