Best Way To Cut Bicycle Cable Housing
As a bike owner, you may need to replace your bicycle cable housing at some point in time. In such a case, you will require the best way to cut bicycle cable housing without damaging the wires inside it. Here are some tips that will help you to cut bicycle cable housing properly and safely:
Choose the Right Tools
The first step to cutting bicycle cable housing is to choose the right tools. You will need a cable cutter, a ruler or measuring tape, and a marker. Cable cutters are specifically designed for cutting cable housing without damaging the wires inside. Using any other tool may cause damage to the housing or wires.
Measure the Length
Before you cut the bicycle cable housing, you need to measure the length that you need. Use a ruler or measuring tape to measure the distance between the two points where you want to attach the cables. Make sure to add a few extra inches to the measurement, so that you have enough housing to work with.
Mark the Housing
Once you have measured the length, use a marker to mark the housing where you want to cut it. Make sure to mark it on both sides of the housing, so that you have a clear line to follow when cutting.
Make the Cut
Now, it's time to make the cut. Hold the cable cutter perpendicular to the housing and squeeze the handles firmly. Make sure to cut straight through the housing, following the line that you marked. You should be able to cut through the housing easily, without damaging the wires inside.
Smooth the Edges
After cutting the bicycle cable housing, it's important to smooth the edges to prevent any damage to the wires. Use a file or sandpaper to smooth the edges of the housing. Make sure to remove any burrs or rough edges that may damage the wire.
Insert the Cable
Once you have cut and smoothed the housing, it's time to insert the cable. Thread the cable through the housing, making sure that it is properly seated. You may need to use a cable end cap to keep the cable from fraying.
Conclusion
Cutting bicycle cable housing is a simple process that requires the right tools and techniques. By following these tips, you can cut bicycle cable housing safely and efficiently. Remember to measure carefully, mark the housing, and use a cable cutter to make a clean cut. Smooth the edges and insert the cable carefully to ensure that your bike is in top condition.